Description

S1-1468-120P US Motor, Blower, 1/4HP, 230Vac, Single Phase, 1050 RPM, CW, with 1 year warranty.

Coleman 1468-120P (Heat only Low speed 800cfm)

Note: This motor uses motor mount bracketS1-37319806100Needed for this upgraded motor when replacing the older Coleman modelnumbers

Due to the US department of energy changing the efficiencyof the electric motorsthe past few years the motor requires a differentmotor mounting bracket as the motor size has changed.

1/4HP, 208/230Vac, Single Phase, 1050 RPM, 3 Speed, 1.5 Amps, 42Y NEMA Frame Size, Open Drip Proof Enclosure, Self Aligning Ball Bearing, Ring or Stud Mount, 1/2″ Shaft, Reversible Rotation, Permanent Split Capacitor Motor.

MotorUses a 7.5 mfd 370V run capacitor (part # POCF7-5A) not included

When ordering this upgraded motor for the Coleman furnaces you need to order the new motor mount bracketS1-37319806100and capacitorPOCF7-5A

Wireing– This is a 3 speed motor now so this motor for Heat only application or 800cfm use low speed, cust cap off the 2 speeds you dont want to use, Zip tie or tape up loose wires

Replaces Part Number 3400A311,1468-120P, 322P249, E322P249, E46993

Coleman 1/7 hp 2-speed blower motor. 230V, 60Hz, 2.5-2.4 amps, 600-1060 RPM. run capacitor required(7.5 Microfarad 370Vac Oval Run Capacitor)1/2″ x 2-7/8″ shaft. Housing is 5″ diameter x 3.5″ deep. Molex pins crimped onto the end of the wires. Shaft rotates counter clockwise when viewing from the back end of the motor. Pins then snap inside a Molex male plug. Order a replacement plug here. Fits many furnaces in the 3100A and 3100B series (but not the 3100).

Replaces the following motors: 3115-3129, 3115-312, 3118B3129, 3118B312, 3118C3129, 3118C312, 3110B3119, 3110B311, 3115A3119, 3115A311, 3118A3129, 3118A312, 3118-3129, 3118-312, 3110-3119 & 3110-311. Fasco71513769, Westinghouse E322P250

• Brown/white one leg of the capacitor.

• Brown= other leg of capacitor

• Red= low

• Blue=med

• Black= High
• Change rotation direction

Product Specifications